
To complete the task of soldering properly, you need to but different types of tools and equipment that the manufacturers have brought in the market. However, as there is a wide array of tools available in different shops, you might find it difficult to choose the right one and often end up by picking the wrong one that is not suitable for your task. To invest your hard-earned money in the right tool and to ensure that you are choosing a quality product, consider the points when go for buying automated soldering equipment: 1. Size What printed circuit board sizes do you need to process? And in case of the single PCB, you must consider, whether it will need to be in a panel of two or more to make production more efficient as well as cost-effective. Are pallets going to be required to hold the PCBs in place through production? The options add to the overall size of the PCB that the machine needs to handle. 2. Floor space How much floor space is available? Based on the configuration, selective soldering machines can vary from about one meter to several meters long. You should also consider board handling as well as storage around the machine. 3. Machine maintenance Most of the soldering machines relatively require low maintenance. However, for example, if you want to run the machine automatically with no human intervention, then you need to consider the fact. Some of the machines require frequent care in comparison with other ones. 4. Solder pots How many solder pots do you require? For instance, you may want to set the machine up to have both leaded and lead-free solder available and to minimize the changeover time between the jobs. For maximizing the throughput, you also require two or more soldering stations. 5. Solder nozzles You also need to consider the sizes and types of solder nozzles. Though it is easy to change over, limiting the number of options will help to improve the throughput. Smaller nozzles are good for getting in between components while the larger ones are generally better for faster soldering. 6. Flux Typically system offers fluxing at the start of the procedure. On the other side, it is a long soldering process; you need to consider fluxing again at a later stage. 7. PCB and assembly handling Systems can be manually loaded and unloaded. For longer, automated runs it might be most efficient to add board stackers at the input as well as output stages. Keep the point in mind while buying Robotic Soldering. 8. Optional extracts Systems are often available with a host of features that might be optional on some and standard on some others. For instance, fiducial recognition for twist or bow in the PCB may or may not be useful. 9. Configuration Would you like to change the configuration of the machine in the future? You might want to add further solder stations, pre-heating or fluxing? If so, then a modular machine will be more suitable than an ‘all-in-one’ solution, though it costs more than the regular ones. If you have considered that buying a machine is an easy task, then after going through the points your concept will change. There is a lot of things to consider for ensuring you get the right machine for your business. In case, you are not satisfied with the ones that are available in the market, then ask the professionals to customize it. To get the preeminent result, choose the right equipment.